Silicone Rubber Spraying Conductive Coating Ink
Product Description
High-temperature vulcanization is used in the production of this ink. The single-component formulation is intended for silicone surfaces that must be electrically conductive. Application methods include silk screen, pad printing, and spot printing.
Application
Mainly applied to silicone products that requires electrical conductivity.
Processing
1.Ensure the silicone surface is free of impurities, oil, particles, etc., by cleaning it thoroughly.
2. Do not use the ink immediately after removing it from the refrigerator; wait until it reaches room temperature. If necessary, reduce viscosity by adding odorless kerosene to suit screen, pad, or dot printing.
3. Leave the ink undisturbed for 10–30 minutes in a dustless environment. After the solvent completely evaporates, curing takes place.
4. Vulcanize by baking at 180–200℃ for 10–20 minutes.
5. aviation kerosene can be used as diluent. For spot printing, mix ink and thinner in a 1:2 ratio. For screen printing, use a 1:0.2 ratio.
6. Resistance is about 100 Ω.
All physical data are only for reference.
Attention
1. The product should be sealed and stored at 0-10°C, and the storage period is three
months. When the product has passed the storage period, it can be further used after
the technical test.
2. The product should be stirred evenly and completely.
3. Printing must be done in a suitable environment. It is recommended to keep the
working area free of dust, keep the temperature below 25 ° C and control the
humidity to 60-75%. Too low humidity will easily cause static electricity in the ink,
which in turn may result in a poor printed image.
4. Unused ink should be sealed and refrigerated.
Packing
1KG/Bottle.
Application range:
